Metal Roofing Fascia Systems

PAC-TITE Angular Fascia, PAC-TITE WT Canted Fascia, PAC-TITE WT Fascia, PAC-TITE WT Extended Fascia, PAC-LOC Fascia, PAC Snap Edge Fascia, PAC Snap Edge Extended Fascia

PAC-TITE WT Canted Fascia

Features & Benefits

  • Superior, efficient design for ease of installation

  • Extensively tested for reliable, long-term performance

  • Welded corners and scuppers available (for aluminum products only)

  • Wide variety of colors and finishes

  • Pre-punched, slotted holes for precise fastener placement

  • Non-penetrating design maintains watertightness integrity

  • Reusable and recyclable material

  • Custom and radius capabilities available

Both versions of PAC-TITE WT Canted Fascia have been extensively tested to meet ANSI-SPRI ES-1, FM 1-270 Approvals and Miami-Dade:

  • WT Canted Fascia with Galvanized Waterdam

  • WT Extended Canted Fascia with Galvanized Waterdam

Additionally, PAC-TITE WT Canted Fascia is backed by a Lifetime 215 mph wind warranty to ensure long-term, worry-free performance.

Petersen’s metal fascia and perimeter systems are designed to take the guesswork out of roof edge detailing. With precision-fit components manufactured in longer 12' lengths, installers save time, reduce handling, and avoid common field fabrication errors. That alone can mean up to 40% less material handling compared to standard 8' or 10' stock.

From clean architectural lines to tested uplift protection, these systems are built for both performance and aesthetics. PAC-TITE Angular Fascia leads the way, offering verified strength for single-ply and built-up roof assemblies—meeting and often exceeding industry standards like ANSI/SPRI ES-1.

To complete the job, Petersen also offers a full line of factory-fabricated accessories—scuppers, miters, and drainage elements—all engineered to integrate seamlessly. It’s a complete fascia solution that installs easily, holds up under pressure, and delivers a polished finish every time.

PAC-TITE Angular Fascia

Features & Benefits

  • Superior, efficient design for ease of installation

  • Pre-punched, slotted holes for
    precise fastener placement

  • Extensively tested for reliable
    long-term performance

  • Wide variety of colors and finishes

  • Convenient 12’ lengths

  • Reusable and recyclable material

  • Custom and radius capabilities available

PAC-TITE Angular Fascia is built for serious performance, delivering top-tier uplift protection for single-ply and built-up/modified roof systems. Its non-penetrating design and extruded aluminum anchor bar provide strong, secure attachment—without compromising your roof membrane. Pre-punched holes speed up installation, and it’s fully tested to meet ANSI/SPRI ES-1 and FM approval standards.

With a wind warranty rated up to 215 mph and a clean architectural finish, PAC-TITE Angular strikes the right balance between strength, aesthetics, and cost efficiency—making it a smart choice for any roof edge detail.

The PAC-TITE line delivers roof edge systems that are as durable as they are good-looking—engineered specifically for single-ply and built-up/modified roofing assemblies. The PAC-TITE WT Canted Fascia comes in two sleek profiles, both designed for long-term performance with a non-penetrating anchor bar, pre-punched fastening holes, and concealed splice plates for a clean finish.

It’s tested and approved to meet ANSI/SPRI ES-1, FM 1-270, and Miami-Dade standards, and backed by a 215 mph wind warranty. Complete the edge with factory-fabricated accessories for a faster, more reliable install from start to finish.

PAC-TITE WT Fascia

Features & Benefits

  • Superior, efficient design for ease of installation

  • Extensively tested for reliable, long-term performance

  • Welded corners and scuppers available (for aluminum products only)

  • Wide variety of colors and finishes

  • Pre-punched, slotted holes for precise fastener placement

  • Non-penetrating design maintains watertightness integrity

  • Reusable and recyclable material

  • Custom and radius capabilities available

PAC-TITE WT Fascia has been specifically designed to meet architectural and industry demands to allow for the smaller face height in heavier gauge covers, such as .050 and .063 aluminum.

A non-penetrating design eliminates the need for stripping in and heat welding, maintaining the watertight integrity of the installation. PAC-TITE WT Fascia features an extruded aluminum anchor bar to securely terminate the membrane. The bar is readily available to dry-in the roof structure for added installation flexibility.

Both versions of PAC-TITE WT Fascia are available and have been extensively tested to meet ANSI-SPRI ES-1 Standard to comply with the International Building Code:

  • Fully Adhered/Mechanically Attached Single-Ply (FA)

  • Built-Up/Modified (BUM)

PAC-TITE WT Extended Fascia

Features & Benefits

  • Elimination of field-crimping for certain products

  • Wide variety of colors and finishes

  • Compliant with most relevant building codes

  • Superior, efficient design for ease of installation

  • Custom fabricated to specific job requirements to ensure superior fit

  • Extensively tested for reliable, long-term performance

  • Miami-Dade-approved coping system: PAC-Tite

  • Lifetime 215 mph warranty for PAC-Tite Gold

  • Convenient 12’ lengths

  • Reusable and recyclable material

  • Custom and radius capabilities available

PAC-TITE WT Extended Fascia combines powerful uplift protection with a sleek architectural profile—engineered for both single-ply and built-up roof systems. With face heights up to 13", this system features a watertight, non-penetrating design that installs efficiently and stands up to tough conditions.

It’s tested to meet ANSI-SPRI ES-1 and Miami-Dade standards, backed by a Lifetime 215 mph wind warranty, and supported by factory-fabricated accessories that streamline the job from start to finish

PAC-LOC Fascia

Features & Benefits

  • Superior, efficient design for ease of installation

  • Extensively tested for reliable, long-term performance

  • Welded corners and scuppers available (for aluminum products only)

  • Wide variety of colors and finishes

  • Pre-punched, slotted holes for precise fastener placement

  • Non-penetrating design maintains watertightness integrity

  • Reusable and recyclable material

  • Custom and radius capabilities available

PAC-LOC Fascia Systems deliver clean lines, smart pricing, and straightforward installation—ideal for both single-ply and built-up/modified roofing systems. With multiple gauge and face size options, each system features a non-penetrating design, dual attachment points, and concealed fasteners that maintain watertight integrity while keeping the aesthetic sharp.

Backed by a 20-year wind warranty and tested to ANSI/SPRI standards, PAC-LOC also comes with factory-fabricated accessories that help streamline installation and reduce onsite errors.

PAC-LOC Fascia 2000

Ideally suited for all single-ply membrane roofs including stone ballasted, the two-piece fascia system features a snap-on cover that eliminates field-crimping. PAC-LOC 2000 offers dual attachment points on both the face and the roof deck to accommodate roof irregularities. The clean design also has no exposed fasteners or cover plates for superior aesthetics while allowing for easy installation.

PAC-LOC Fascia 3000

Designed for a built-up or modified roof system, the fascia cover can be installed after the membrane is complete, allowing the contractor to dry-in the building while preventing damage to the finish cover that may be caused by asphalt splatter.

PAC Snap Edge Fascia

Features & Benefits

  • Superior, efficient design for ease of installation

  • Extensively tested for reliable, long-term performance

  • Welded corners and scuppers available (for aluminum products only)

  • Wide variety of colors and finishes

  • Pre-punched, slotted holes for precise fastener placement

  • Non-penetrating design maintains watertightness integrity

  • Reusable and recyclable material

  • Custom and radius capabilities available

PAC Snap Edge Fascia delivers dependable wind uplift protection for flat roofing systems—while staying cost-effective and simple to install. Its snap-on cover design, 12′ lengths, and pre-punched holes speed up installation and reduce material handling on site.

Engineered to meet ANSI/SPRI ES-1 standards, it also supports thermal movement for long-term performance. Available in three versions to fit a range of roofing types, this fascia system ensures consistent quality and a clean finish across every detail.

PAC Snap Edge Extended Fascia

Features & Benefits

  • Superior, efficient design for ease of installation

  • Extensively tested for reliable, long-term performance

  • Welded corners and scuppers available (for aluminum products only)

  • Wide variety of colors and finishes

  • Pre-punched, slotted holes for precise fastener placement

  • Non-penetrating design maintains watertightness integrity

  • Reusable and recyclable material

  • Custom and radius capabilities available

PAC Snap Edge Extended Fascia delivers strong wind uplift protection for flat roofs, while staying budget-friendly and easy to install. Designed to meet ANSI/SPRI ES-1 standards, it’s available in two configurations—one for Fully Adhered/Mechanically Attached systems and another for Built-Up/Modified roofs.

With thermal movement support, quick-install features, and factory-fabricated accessories, this system helps reduce labor time and material handling costs without sacrificing performance or aesthetics.

Pac metal roofing, wall, & trim catalog

Explore

Color charts

FAQ

  • Yes, see here forour color options.

  • Click here to learn more about IB Roof Systems

  • Chris Headley himself has over 22 years experience with construction materials such as PAC-Clad | Peterson products.

  • From Oklahoma City to Houston, and from Midland/Odessa to East Texas