PVC Roofing in Dallas TX | A Guide by CK Materials
the best Long-term cost control
“PVC is for the property owner who wants to spend the least, over the longest period of time”
- Chris Headley
PVC roofing material stands out. For commercial PVC roofs in Dallas, PVC offers durability, energy efficiency, and long-term cost control that many other flat roofing systems simply can’t match.
We work with IB Roof Systems, one of the most trusted PVC manufacturers in North America, to help architects, contractors, and owners select systems that actually perform in Texas conditions.
PVC (polyvinyl chloride) roofing is a single-ply membrane designed primarily for flat or low-slope commercial roofs. The defining feature is hot-air heat-welded seams, which fuse sheets into a continuous, watertight surface.
Unlike BUR systems (tar and gravel), which rely on layered redundancy, or TPO systems that can weaken under prolonged heat, PVC membranes form seams that often exceed ASTM strength requirements.
Average PVC cost is $6.50 – $9.50 per sq. ft
PVC Roofing vs Built-Up Roofing (BUR) in Dallas
BUR Strengths
Seamless waterproofing when properly installed
Good puncture resistance
Proven history
BUR Limitations
Heavier systems add structural load
Longer installation time
Higher labor costs
Harder leak detection and repairs
In contrast, PVC roofing systems provide:
Lighter-weight assemblies
Faster installation
Easier maintenance
Higher reflectivity and energy savings
For many Dallas-area commercial buildings, PVC has become the preferred upgrade path from aging BUR roofs.
Average Commercial Flat Roofing Costs in Dallas ($/sq ft)
Why PVC Roofing Performs So Well in Texas
PVC roofing is uniquely suited for Texas environments because it resists:
UV degradation
Standing water
Grease and chemicals (critical for restaurants and industrial facilities)
Fire (Class A rated systems)
IB Roof Systems’ white PVC membranes reflect up to 87% of solar radiation, helping reduce cooling loads during long Dallas summers. Many owners see measurable energy savings after switching from dark or aggregate roofs.
PVC Roof Options Available in Dallas
IB Roof Systems offers multiple PVC solutions, allowing systems to be tailored—not forced—to a building.
PVC Roofing Membrane
Flexible single-ply membrane for flat or low-slope roofs
Available in 50, 60, and 80 mil thicknessesPVC Roof Panels
Rigid or structural applications where design or slope requires it
IB systems are supported by complete accessories—insulation, cover boards, adhesives, drains, flashings, and edge metal—qualifying for Total System Warranties up to 30 years.
PVC Roofing Costs in Dallas
PVC roofing costs vary based on roof size, condition, and system design.
Typical Dallas PVC Roofing Costs
$6.50 – $9.50 per sq. ft.
Larger roofs = lower per-foot cost
Tear-off vs overlay affects pricing
Insulation, taper, and attachment method matter
While PVC has a higher upfront cost than TPO, its longer lifespan and reduced maintenance often deliver a better ROI.